In nearly all situations, most individuals spend quite a lot of money buying their forklift. Thus, it is really important to take proper care of it so as to protect your investment well into the long run. It is a good idea to know the procedures which are carried out during taking care of and maintaining this machine.
By starting up the forklift and listening carefully how it works is amongst the best ways to tell how good the engine is performing. Like for example, if there are any knocks or misses, the machine is faulty and this must raise some issues. Furthermore listen closely for any squealing sounds which come from the belts since these sounds will provide you with a lot of information.
When carrying out maintenance, several of the main components you will need to pay attention to consist of the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components must be replaced as soon as they are noticed. It is also essential to check the wiring.
The battery compartment terminals must be cleaned when the above components have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each and every battery cell has to be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the issue accordingly. Next, inspect each and every other component of the machinery including the wheels. If any kind of issue or fault is detected, be certain to deal with it immediately so as to make sure the machine is working at its safest and optimum levels.