Propane Tank Policies
The gas container, LP System or liquefied petroleum system is a collective term by OSHA that refers to the regulators, piping, hoses, regulators, fittings and valves. Depending on the tank capacity, the agency needs particular parts. These individual components should go trough recognized laboratory testing. The correct laboratory approval shows that the system components meet pressure, thickness and construction standards.
Tank Location
The organization OSHA determines how close the propane tank can be mounted in relation to buildings, to ignitable materials, to tanks containing inflammable liquids, cutting torches and welders. These strict regulations are implemented to make the jobsite as safe as possible for the employees and other people who are nearby.
Nameplate Marks
LP systems require that the address, the name, the container supplier, and or the tanks trade name, be marked on the propane container. The capacity of the container is to be listed with the following details: pounds or gallons of fuel, square foot outside surface, pressure and fill level. Furthermore, information regarding whether or not the container is made for installation underground or above ground is also visible. These markings should be on a metal plate connected somewhere visible to the container. OSHA requires that each and every tank must be marked by the National Board of Boiler and Pressure Vessel Inspectors in order to be considered safe and ready to utilize.
Tank Repairs and Modifications
OSHA also regulates any kind of repairs to the LP systems, like welding. The workers performing repairs and the tank owners must know the regulatory codes and standards which the tanks were manufactured. Welding repairs to any part of the system which is subject to internal pressure needs to first follow these fabrication codes. Any other type of welding is only allowed on lugs, brackets or saddle plates.
The OSHA works hard to make sure that individuals who work with lift trucks and in their vicinity are kept safe. They have strict regulations and training procedures in place in order to make sure that these industrial machines and their repair processes are handled with respect and as safe as possible. It is really vital that companies follow their rules and steep fines could occur if they are not adhered to.