Nissan's UFS reach trucks can function in a 4-way action, which enables these units to perform precision jobs in any direction. Typically, these narrow aisle forklifts are utilized for stacking of normal, long or wide loads up to 9700 mm, loading and unloading from ground level and internal transfer.
These particular models can accommodate cargo of 2.5 ton within narrow aisle applications, in addition to wide load jobs also. These features allow the lift truck to make best use of storage space and will accommodate each and every kind of pallet, including closed versions. The space efficiency of this model is extenuated because of its extended mast option.
Similar to the majority of reach trucks on the market, the maintenance costs are fairly low. Most of the components are easily accessible across the range and basic.
The truck has built in CAN Bus technology in its BITE test equipment. This feature is capable of self-diagnosis and monitoring. The truck's LCD screen offers precise fault information to feature improved maintenance and repair times. This enables the operator to enjoy greater up-time and lower costs overall.
URF is a very sophisticated unit of narrow aisle truck that is equipped with swivel-reach. The forks horizontally rotate 180 degrees to allow stacking on either side as well as to the front of the aisle. This truck could be used with wire guided operation in free-ranging operations all over the warehouse or within aisles as narrow as 1.5 meters. The way this particular forklift has been designed allows optimum warehouse space use and the overall operation is simpler and faster compared to man-up operations. The mini steering wheel, fully adjustable fingertip and seat controls together with power steering option and the "floating" arm rest, all contribute to comfortable and productive operation. Statistics show that the happier and more comfortable the operator is the higher level of production.
The rotating forks on the URF unit can be utilized for both aisle and warehouse handling applications. This model is best suited for aisle-ways which are just 300 mm wider than the transported load. Furthermore, the Autostop extra safety feature automatically stops the truck at the end of the aisles. Ancillary equipment and data terminals are easily integrated. The video-view applications enable the operator to visually inspect the load at every stage of the handling procedure while maintaining the "man-down" position for simple truck access.